How To Remove Dealership Stickers From Car Paint? Let’s Stick It To Them!

Spread the love

Are you tired of seeing those pesky dealership stickers on your beautiful new car? You’re not alone. It’s frustrating to spend money on a vehicle only to have it covered in advertisements for the dealership that sold it.

Luckily, removing these stickers is fairly simple and can be done at home with just a few household items.

The first step is to heat up the sticker using a hairdryer or hot water. This will soften the adhesive and make it easier to peel off without damaging the paint underneath.

Once heated, use a credit card or plastic scraper to gently lift one corner of the sticker. Slowly pull back while applying pressure until the entire sticker has been removed.

If there is any residue left behind, apply some rubbing alcohol or Goo Gone onto a clean cloth and rub over the area until it comes off completely.

Tip: Always test any cleaning solution on an inconspicuous area first before applying it all over your car paint.

In just a few easy steps, you can remove those unsightly dealership stickers from your car’s paint job and take pride in driving around town without being their free advertising! Keep reading for more tips on how to keep your car looking its best!

The Classic Method

One of the most classic methods for removing dealership stickers from car paint is by using a hairdryer or heat gun to soften the adhesive. Once heated, use a plastic card like an ID or credit card to scrape off as much of the sticker and underlying glue residue as possible.

If any sticky residue remains, apply some rubbing alcohol on it and scrub with a soft cloth until it comes off. Be careful not to scratch your car’s delicate paint in the process!

“This method has been tried and tested over time with great results.”– Anonymous Car Enthusiast

This technique can be done quickly and inexpensively without having to buy specialized products you might only use once. It does require patience and effort though.

Note that this method works best for newer stickers that haven’t had too much exposure to weather elements yet. If your new-to-you used vehicle still wears decades old vinyl graphics, odds are they will prove more difficult but still worth trying out before moving onto harsher chemicals.

Soap and Water

If you would like an easier way to remove dealership stickers from your car’s paint, reaching for a common solution such as soap and water could do the trick.

The process is quite simple but will take some patience so make sure you have enough time set aside before beginning. First, get a bucket of warm water and add dishwashing soap in it. Mix well until bubbles form on top.

“Using hot water with mild dish detergent can be very effective at removing stubborn adhesive residue.”

Dip a soft cloth into this mixture ensuring that it absorbs all the suds created by the bubbled up formula. The idea is not to use too much stress or friction while rubbing over the sticker area.

Note:Avoid using harsh cleaning agents such as bleach, vinegar, nail polish remover or even petroleum-based substances since they can damage both the surface of your vehicle’s paint finish as well as any plastic components trapped beneath these decals which may crack under saturated solutions if left for prolonged periods without treatment.

Circular motions usually work best when moving across edges surrounding vinyl lettering laid atop adhesive backings because oils generated during manufacturing processes tend to bind heavily producing harder-to-remove residues. If there are still traces remaining after initial attempts don’t give up just yet; repeat earlier steps letting soapy waters soothe through multiple cycles applying gentle pressure easing out obnoxious bits holding down onto painted surfaces bravely fighting against their freedom like peeling cheap wallpaper off drywall mightily resisting efforts made towards liberty. On completion apply fresh coat(s) wax-polish covering exposed portions where old tactile markings formerly egotistically resided preserving host finish luster protecting surroundings dour & wilty deterioration also increasing breathing financial appeal thusly!.

Blow Dryer

If you’re wondering about how to remove dealership stickers from car paint, then grab your trusty blow dryer and let’s get started. Dealership stickers can be a pain to remove but with the help of a few household items like a blow dryer, it becomes easier.

The first step is to plug in your blow dryer and turn it on high heat mode. Hold the nozzle 2-4 inches away (depending upon how hot the dryer gets) from the sticker for at least two minutes until visibly heated up. Make sure not to hold closer as too much heat will damage the paint job below or around it.

Note:“If you’re concerned about using too much heat that might end up damaging paint, use lowest hairdryer setting instead”

Gently rub an edge of decal after heating with fingers, plastic scraper or credit card by keeping angle shallow until lifted out partially breaking adhesive bond due to temperature change in adhesives properties. Once part peels offer more warmth under loosened part wherever necessary all way while pulling steadily outward towards rest area without getting any residue sneaking off behind left-over gunk collecting paper towel usually does trick just slow movements required when dealing finer graphics next day before holding back wash soap system down removing memories life events cherished & moments caught cameras windscreens driving force destroying aesthetic outlook clear glass hindering view time amp;

You may have some residual glue stuck onto your car once most of the decal has been removed. You can try different types of methods including Goof Off that dissolves glue type substances for quick removal solution instantaneously so don’t worry stickiness come right off!

Razor Blade

If you want to remove dealership stickers or any other kind of adhesive sticker from your car’s paint, a razor blade can be an effective tool. However, it requires some care and caution while using it. Here are the steps-

  1. Prepare the Surface:
  2. Start by washing and drying the area thoroughly around the sticker you want to remove. This will make sure there is no dirt or grime that could get caught under the blade while removing the sticker.

  3. Use Heat To Loosen The Sticker:
  4. You can use a hairdryer to warm up the adhesive underneath as this softens it up thus making removal easier without leaving ugly marks on paintwork if done “cold”. Hold the dryer about six inches away from sticker until its softened enough for safe peeling back with fingers not catching at corners or lifting during process which could cause scratches later down line.

  5. Cut Corners Of The Sticker Using Razor Blades:
  6. Carefully start cutting through one corner edge of label whilst being mindful how close blade gets towards body work avoid causing any damage ensuring keep angle reduced (i.e., close) so edges removed smoothly around main section; do same each opposite side

  7. Gently Scrape Off The Adhesive With Razor Blades:
  8. The bigger part of Label must then lift off allowing access to residue remaining apply gentle force onto flat area near sticky parts in clean straight lines working outwards checking surface remains clear avoiding jagged tear or pressure points certain methods i.e Hard scrapes/ harsh sandpaper quality become permanent feature beneath masking solutions putting time aside patching ineffectual technique instead proper lasting solution targeting what caused issue in first place even if means paying professional.

“I always use a razor blade to remove stickers from my car paint. It’s important to be patient and careful while doing it, as you don’t want to scratch the surface of your vehicle.”

Above all else if not sure about any product methods seek guidance other forums where experienced enthusiasts discuss ways removing adhesive marks when fully researched recommended try out tips equipment so won’t risk causing more harm than good ultimately age won’t forgive poor judgement how treat delicate body parts deserving care precision attention detail they deserve for masterpiece on-looker pass-by in admiration instead poorly repaired regretful amercement.”

The DIY Solution

If you are looking for a more affordable solution to remove dealership stickers from car paint, then the DIY approach is your best bet. The following tips can help you get rid of those pesky stickers without damaging the vehicle’s paintwork:

1. Use Heat

You may use heat to loosen sticker adhesive and peel it off easily. With an ordinary hairdryer, blow hot air directly onto the sticker until it warms up and becomes pliable.

2. Apply Rubbing Alcohol or Vinegar

A small amount of rubbing alcohol or vinegar can work wonders in removing residue left by old adhesives after peeling off a sticker.

3. Try Peanut Butter or Cooking Oil

Peanut butter has oils that aid in breaking down sticky substances on surfaces – including glass, metal, painted cars etc.. Simply apply peanut butter over the sticker area allowing enough time before wiping clean with water and soap afterward (so no oily stains remain). Alternatively, cooking oil (coconut/ vegetable) also works well when applied similarly.

“Peanut butter does wonder for getting dealer decals off! It was so much easier than using Goo Gone.”
4. Make Use Of A Razor Blade

To prevent scratches when employing this technique Consider wrapping masking tape around razor blades’ edges before trying to scrape away any glue residuals carefully while holding at about 30-degree angle against corners if necessary or left-over bits too stubborn even with other techniques mentioned above already attempted their efficacy should not be ignored completely!

Remember; Work slowly towards one corner provided all sections have been evenly heated beforehand as this makes them less likely damaged only once edge comes lose! These simple solutions allow anyone who wants to remove dealership stickers quickly & efficiently possible by following a few simple instructions and not have to resort to using professional services.

Baking Soda and Vinegar

Removing dealership stickers from car paint can be a hassle, especially if they were not properly placed in the first place. However, there are effective ways to remove them without damaging your car’s paint job.

A popular method is using baking soda and vinegar. Baking soda is an abrasive substance that gently removes adhesive residue while also acting as a neutralizer for any acid present on the sticker. The vinegar helps soften the glue, making it easier to peel off.

Here’s how you can use this technique:
  1. Mix equal amounts of baking soda and water in a bowl until it forms a paste-like consistency.
  2. Saturate the sticker with white vinegar and let sit for 5-10 minutes.
  3. Apply the baking soda paste directly onto the sticker area.
  4. Gently scrub away at the sticker with a plastic scraper or credit card (avoid using metal tools).
  5. Rinse off any remaining mixture thoroughly with warm water.
“The combination of baking soda and vinegar is ideal for removing stubborn adhesives like those used by dealerships.”

If necessary, repeat these steps until all remnants of the sticker have been removed. It’s important to note that although cider or apple-based vinegars work too, distilled white vinegar may be more potent due to its higher acidity level.

This tried-and-trusted option has proven successful time after time when removing dealership stickers from car paint. Additionally, as opposed to resorting to chemical solvents or razor blades which could damage your vehicle even further – this natural alternative won’t compromise your car’s appearance nor will it leave behind harmful chemicals on your skin; thus resulting environmentally friendly too!


If you recently purchased a new car from the dealership, you may have noticed that they put their sticker on your car. Although it’s their way of advertising to other potential customers, it could be an eyesore to you. Fortunately, there are various ways in which you can remove this sticker without damaging your car paint.

The most common method is by using WD-40. According to experts, spraying WD-40 on the edge of the sticker and allowing it to settle for several minutes will cause adhesive breakdown resulting in easy removal.

“Applying WD-40 onto stubborn residue stickers or emblems should pretty much do the trick, ” says Steven Johnson; Director of Marketing at Turtle Wax.

Begin by cleaning any dust or dirt with soap water before proceeding with the application process. Spray enough WD-40 around the edges of the sticker until fully saturated especially if it has been stuck on for quite some time as this means that more adhesives were used during its initial placement.

After a few minutes, use either a plastic card or scraper tool provided together with WD-40 purchase, push them under one corner/edge then lift up gently ensuring not damage your car bodywork underneath the material layer piece left behind after peeling off.. Continue scraping away slowly till all remnants come out clean leaving no glue residues whatsoever attached anywhere else except where previously placed so carefully consider environment once removed dispose properly avoiding harming natural habitats such oceans wildlife endangered species thereby saving costs repairs later!

In conclusion applying lubricant fluids like wd 30 protect floors vehicles ultimately heavily reduced providing long-term care protecting investment regardless however small

The Unconventional Way

If you’ve ever bought a new car or if your used car was previously owned by someone else, it’s highly likely that the dealership has placed their branding on the back of your vehicle. These stickers often have crucial information such as oil change and maintenance schedules, but they can also be quite unattractive.

Removing these dealership stickers from cars is not always easy. The traditional method involves using heat guns and razor blades which can damage both the underlying paintwork and any other decals in close proximity to the sticker.

“One unconventional way of removing Dealership Stickers safely is by using a hairdryer.”

This may seem like an unusual approach; however, applying concentrated blasts of hot air around 6 inches away from the sticker fragilizes its adhesive qualities. Once heated up sufficiently, use a credit card or plastic spatula to gently work underneath one corner until you find purchase with enough room for more maneuvering on either side; then pry upwards slowly avoiding big quick motions so that only small pieces come off at once instead of tearing them apart entirely leaving residue behind Eventually when all sections peel cleanly away without struggle or signs thereof this technique becomes painless—even enjoyable!

Citrus-based cleaners available begin next stage including lighter fluid helps loosen glue substances residues too much steadfast held into bodyworks areas gained over time causing yellows stickiness left remaining after several intense washing cycles turn impossible remove outside regular procedures are followed; hence making sure no unwanted detrimental effects occur while trying gets rid remnants during deep cleaning sessions aimed restoring original lasting appearances intended manufacturer meant preserving automobile timeless features ensure efficient functioning optimized driving performance experiences even hitting speeds expected typical average roadways.

Peanut Butter

Did you know that peanut butter can help remove dealership stickers from car paint?

Yes, you read it right. Peanut butter is an excellent alternative to harsh chemicals or using a scraper when removing those stubborn dealer stickers from your newly-purchased car.

“Peanut butter contains oil and thus may be effective in breaking down adhesives.” – Megan Wetzel,

To effectively use this method:

  • Firstly, make sure the vehicle surface is clean of any dirt or debris around the sticker before starting with the process.
  • Scoop out a generous amount of smooth peanut butter (creamy not chunky), and then apply it directly over the adhesive side of the sticker.
  • Liberally spread the creamy substance allowing it to sink through all parts of the sticker uniformly until it forms a thick coating measuring about 1/4-inch thickness on top of everything.
  • Leave for approximately eight hours—the oils present in peanuts will start working by slowly deteriorating glue bits between paper layers while at rest. If possible, leave overnight for better results.(Tip: Seal off loosely applied cling film above moist nutty mixture so ants won’t get attracted).
  • The following morning, dampen an old rag/cloth soaked in water upon which soap has been added as this way; you safeguard against nasty marks appearing after removal if rubbing particular compound delicately across affected area does nothing
  • (Caution: Avoid excess liquid accumulation sitting atop layers underneath wrapping material since dissolving without adequately drying back later could worsen damages).
“Goo Gone products are specifically formulated to loosen sticky messes. For stubborn residue left behind from stickers, try using Goo Gone Sticker Lifter.” – Laura Wallace-Boyd, Napa Valley Register

Peanut butter works well for small and medium-sized dealer decals but may not be suitable if larger ones are present.

Another alternative option available is to use commercially-made adhesive removers like Goo-Gone or WD-40 that quickly break down the sticker’s glue by dissolving it away with no peanut-y-slathering of any stuffy substance over surface require-any nonsense!

Hair Dryer and Dental Floss

Dealership stickers can be a real pain to remove from car paint. Though they serve as promotion materials for the dealership, when you want them gone, it takes more than just peeling them off directly.

The trick to removing dealership stickers is heating up the glue underneath so that it melts away without damaging your car’s paintwork. One simple tool perfect for this job is a hairdryer! By directing hot air onto the sticker itself, it softens up the adhesive making its removal a breeze.

“In order to avoid any damage to your vehicle while removing stickers or decals, always consider using heat through tools like hair dryers before scraping anything off from your body of the car.”– Alex Gutierrez (Manager at Precision Auto Body & Painting)

You will have to hold the dryer close enough for about two minutes until you feel some warmth on your hands because overheating can cause paint blisters and melting in certain cases. As soon as there’s some looseness around an edge of the sticker or decal apply gentle pressure with dental floss behind it – working slowly and carefully- pulling toward yourself but start in one corner first rather than starting in-middle which usually is harder part – then use plastic scraper gently over stuck areas if necessary till everything comes out clean evenly leaving no residue behind!

Dental floss provides abrasion-free removal; It eliminates any chances of scratches or ugly smudges that may occur due to rough methods like razor blades/scraper knives/solvents/etc., that could leave traces taking much longer time-consuming effort along with probably costly repaint worth thousands down-the-line.

“Using less harsh techniques such as utilizing household products like hairdryers alongside items foundin dentists’ offices, like dental floss creates a more polished finish for your vehicle when removing decals. “– John Parker (Owner of JRP Auto Services)

Now that you’ve removed the sticker or decal from your car’s paintwork with effortless ease and without any damage or scratches through hair dryers and dental floss! – Congratulations are in order!

Goof Off

If you have recently purchased a new car, chances are that it comes with an unsightly dealership sticker on the paint. This can be frustrating for those who want a sleek and clean look for their vehicle. Fortunately, there is an effective solution to remove these pesky stickers: Goof Off.

Goof Off is a powerful solvent that can effectively dissolve adhesives without damaging the surface of your car’s paint. It is specifically designed to break down tough buildups like tar, glue residue, adhesive marks, and more on delicate surfaces leaving no scratches or marks behind.

“I was hesitant at first about using solvents on my car’s paint but after reading many positive reviews about Goof off I decided to give it a try – worth every penny!”
– Samantha H., satisfied customer

To use this product correctly take the following steps: First apply some petroleum jelly around the edges of the dealer sticker as any overspray will affect other areas of your car’s paintwork unnecessarily. Then spray plenty of goof off onto a soft cloth or cotton ball then place over dealer sticker until completely covered. After waiting 20-30 seconds allow products reach full potential before lightly wiping away any remaining residue (repeat process if necessary).

Avoid using sharp tools such as razor blades as they might scratch up your pricey painted finish while scraping underneath edges may cause lift ups and leave noticeable outline shadows where once sat bumper scars requiring costly aluminum repairs

“My uncle thought he could save himself money by removing his own decals with razors only messed everything up – I recommend sticking solely with solvents like GooffOff”
– Tom K., experienced mechanic

In conclusion, removing dealership stickers from car paint doesn’t have to be a daunting task. By using Goof Off, car owners can easily and effectively remove these unsightly stickers without damaging the paint job. Remember to use proper precautions when working with solvents and avoid any harsh tools that may create more noticeable damage on your prized possession.

Frequently Asked Questions

What are the best methods for removing dealership stickers from car paint?

The most effective way to remove a dealership sticker is using heat. You can use a hairdryer or a heat gun on low setting to warm up and soften the adhesive of the sticker, which makes it easier to peel off. Alternatively, you could also try using rubbing alcohol or vinegar solution with hot water and gently rub over the sticker until it starts coming off.

What household items can be used to remove dealership stickers from car paint?

You may already have some items at home that could help in removing grease, glue residues from your car’s surface after peeling off the dealership stickers. Some common products you might not know about include peanut butter, baking soda paste, Goo-Gone, WD-40 spray lubricant, nail polish remover (acetone), window cleaning solutions etc., These products help dissolve and dislodge adhesive residue for easy removal without damaging your vehicle’s paintwork.

What precautions should be taken when removing dealership stickers from car paint?

Safety measures must always come first when trying out DIY projects like this. Be sure to select suitable soft tools such as plastic scrapers so as not scratch your vehicle finish during removal process. Always avoid sharp objects since they mostly leave scratches/scuffs behind once applied force against your paint substrate underneath. It is equally important wear protective gloves & eyeglasses too if utilizing any strong chemicals such flammable liquids because these can cause harmful fumes

Are there any commercial products specifically designed for removing dealership stickers from car paint?

Absolutely! There are various automotive detailing local shops and e-commerce platforms offer specially formulated solvents meant just solely manufactured inorder assist cars owners get rid unsightly dealer decals/stickers swiftly between detailing sessions.The solvent’s application process is mostly like a sticky label with its own adhesive thus making it possible to lift adhesives residues away effectively without causing significant damage over one’s vehicle surface.

What are some tips for preventing damage to car paint while removing dealership stickers?

It can be quite frustrating when you remove the sticker and notice that your car paint was also coming off! To prevent this happening, ensure you follow the correct procedure such as using mild solvents first or try spraying Goo-Gone onto paper towel/ cotton ball then gently rubbing around edges stickier parts before firmly pulling decal/sticker in a sideways motion.Ensure no adhesive residue remains behind.Generally frequent washing of car will help keep Dealerships Stickers from becoming too embedded into Car Paint being much easier wipe away at any moment.

Do NOT follow this link or you will be banned from the site!