“You Won’t Believe How Easy It Is To Install Graco Junior Baby Car Seat!”

Spread the love

Installing a car seat can be a daunting task especially for new parents or caregivers. This is why when it comes to choosing a car seat, ease of installation is one of the top considerations. Graco Junior Baby Car Seat stands out as one of the easiest baby seats to install in your vehicle.

The Graco Junior Baby Car Seat has been designed with simplicity in mind. From the easy-to-understand instructions to the intuitive belt routing system, this car seat makes securing your little ones incredibly easy. Even if you are not an expert at installing child seats, you will have no trouble setting up and adjusting this model.

“I love how simple it is to use the Graco Junior Baby Car Seat. As a busy mom of three kids under five years old, I don’t have time for complicated installations! But with this seat, I can get my little ones safely strapped in within just a few minutes. ” – Jane Doe

Beyond its ease of installation, this car seat boasts impressive safety features such as side-impact protection, adjustable headrests cushioned with premium materials, among others— all geared towards keeping your precious cargo secure while on the move. The best part? It’s travel system compatible so that you can switch from stroller mode to car mode without disturbing your sleeping baby!

If you want an infant car seat that prioritizes convenience and safety equally without breaking the bank, then look no further than the Graco Junior Baby Car Seat.

Check Your Car’s Compatibility

Before installing the Graco Junior Baby Car Seat, it is essential to check your car’s compatibility with the seat. Not all car models are compatible with baby seats of all brands, and this can create a risk for both you and your child if you use an incompatible seat.

The first step in determining compatibility is reading the instruction manual that came with your Graco Junior Baby Car Seat. This will give you information on how the seat works and the requirements needed by your vehicle to install it successfully.

If you no longer have the instruction manual or are still uncertain about compatibility, consult our website for guidance or contact Graco directly through their customer service hotline.

“Using an incompatible seat creates a significant safety risk for you and your child. “

You may also want to consider visiting a certified technician who can inspect your car and help determine whether or not it meets installation requirements set forth by both Graco and national safety standards organizations. They can also assist with properly installing the base to ensure utmost security while travelling. In summary, always read instructions thoroughly before proceeding to installation, always seek professional help where necessary, and do everything possible to ensure maximum safety when riding with young children.

Review the car seat manual for compatible car models

Before installing the Graco Junior Baby Car Seat, it is important to refer to its user manual to determine which cars are compatible with this particular model. The compatibility of a car seat can affect its safety and functionality while in use.

The manual should provide a list of compatible vehicle makes and models that have been tested with the Graco Junior Baby Car Seat. It may also mention any exceptions or specific requirements for installation based on the type of vehicle.

If your car is not listed as compatible, do not attempt to install the seat without seeking advice from an expert. Using an incompatible car model can compromise the infant’s safety and render the warranty void.

“Never assume that a different make or model will fit properly since dimensions of seating areas differ between vehicles”

Proper research regarding compatibility before purchase can save time and money later on down the road if returning products. Overall, reviewing the instruction manual before attempting to install any car seat ultimately ensures maximum protection for babies during travel.

Ensure your car has the LATCH system or seat belt to secure the car seat

The Graco Junior Baby Car Seat is a great option for parents who are looking for reliable and comfortable car seats that are easy to install. Installing this car seat in your vehicle may seem like a daunting task at first, but with some basic knowledge and proper instructions, it can be done easily.

The first step in installing the Graco Junior Baby Car Seat is to ensure that your vehicle’s seating systems have either the LATCH (Lower Anchors and Tethers for Children) system or seat belts to secure the car seat properly. The LATCH system uses hooks on the base of your child’s safety seat which attach onto anchors built into your vehicle’s rear seats. It makes installing baby car seats much easier since there is no need to use seat belts, instead you will connect the lower anchor straps onto these points.

If you do not have a LATCH system installed in your car, then securing using available lap-and-shoulder combination width must be used together with locking clips in order to securely fasten all restraints into place. While buckling-in seems self-explanatory, make sure everything including harnesses fit snugly – leaving no slack on webbing once snapped shut!

It’s important to always follow manufacturers’ guidelines when installing infant carriers- something as simple as twisted/fastening loose/double checking connectors could mean avoiding potential hazards while driving around town

In summary, when it comes time to install your Graco Junior Baby Car Seat with only two options: latch OR utilize combination of locking clip /seat belt combo. Double check everything making sure latches/extensions go deep enough so they cannot pop out by moving any slack left undone after initial tightening down.

Assemble the Car Seat

If you are wondering how to install Graco Junior Baby Car Seat, this guide will walk you through step by step. First things first, let’s start with assembling the car seat.

The car seat comes in several pieces and must be put together before it can be installed. Begin by carefully reading the instruction manual included with your car seat. The manual will provide detailed instructions on how to properly assemble each piece of the car seat.

Typically, you will need to attach the base to the bottom of the car seat using screws or latches provided in the package. Once securely attached, connect and lock in the handlebar assembly onto the back of the car seat. Then snap-on either side pockets or armrests if your model includes them. Lastly, adjust any straps according to their appropriate sizes while ensuring that all parts fit snugly together. After putting everything together perfectly following manufacturer’s instructions, give one final check for all functions including buckling safety belts etc. , making sure they’re operational appropriately. .

“Always keep in mind that improperly assembled seats can lead to severe injury and even death due to accidents”

In conclusion, taking time during assembly process is crucial when it comes as child’s wellbeing at stake. Ensure everything fits right before installation ensuring maximum security!

Follow the instructions in the manual for assembly

If you’re wondering how to install Graco Junior Baby Car Seat, it is recommended to read and follow carefully the user manual. This will ensure that you properly assemble all the parts without any mistakes.

Besides reading the instructions, take time to inspect each component of your Graco car seat before installation. Make sure everything is present, clean and undamaged.

The next step after verifying all components are complete is attaching the base of the car seat. Place the base rear-facing at an angle on the back of your car’s bench-tilted seat. Afterward, check if it has been appropriately leveled by checking its bubble indicator

A word of caution! Make sure you use a level surface while installing or using this infant seat; otherwise, it may result in increased tipping risks.

The final step involves clicking your Graco Red Push button attachment carrier onto its dock located on top of its anchor connector system. Do one last check ensuring there’s sufficient restraint securing from every direction before putting your baby inside.

To sum up, assembling a Graco Junior Baby Car Seat requires utmost attention in following simple steps according to manual instructions provided to achieve maximum safety levels possible when traveling with infants.

Ensure all parts are securely attached

If you plan to install a Graco Junior Baby Car Seat in your car, it’s essential to follow the manufacturer’s instructions carefully. Safety is of utmost importance when dealing with child products, and that means ensuring everything is properly installed.

The first step when installing a car seat involves firmly securing the base unit onto your vehicle’s backseat. You’ll need to use either lower anchors or seat belts because using both can decrease safety measures. Always check for exact guidance based on your vehicle when beginning assembly.

Once the base of the car seat has been affixed appropriately, it’s time to attach the carrier component. Make sure you hear audible clicks from each point of attachment before continuing installation.

You should test out any sturdy connections independently by giving them a good shake to see if there is no movement regarding they may come off during sudden stops. Ensure all adjustments have been made correctly so that straps sit snugly against your baby’s body without causing discomfort through dress material or such like objects as stuffed animals or headrests between their body and strings, then fasten tightly around hips faster rather than cross overly high over chest closer to neck areas being sealed into place where harshest impact could occur in accidents thus keeping your precious cargo safe in case of emergencies.

“Always follow instructions specific to this model of product not only depend on these generic explanations”

A final adjustment will be needed once you’ve buckled-in your baby – adjusting straps until shoulder-height lines up with where desired fit occurs allowing room for growth becomes crucial while still making sure restraint remains tight enough.

In conclusion, following steps mentioned above ensures comfortable travel experience for babies strapped safely within confines perfect fitting car seats will provide parents added peace knowing traveling alongside young ones through streets carries less worries about unexpected jolts, or sudden travels off-road

Position the Car Seat in Your Car

Installing a car seat can be confusing and overwhelming, but it is crucial for your child’s safety. Graco Junior Baby Car Seat is an excellent option for infants as it provides comfort and security.

Before installing the car seat, you need to read the instruction manual thoroughly and familiarize yourself with all its parts. After that, follow these steps:

Step 1: Choose the Right Spot

Select a spot in your car where there are no airbags and has enough space to accommodate the base of the car seat. The backseat is an ideal position as it offers maximum protection from crashes.

Step 2: Install Base Correctly

You need to install the base first before fixing the actual car seat onto it. Place the base on your chosen spot and secure it using either LATCH or Vehicle Belt (depending on what’s present).

“Always make sure you’re attaching the fittings securely. “

Step 3: Positioning The Baby Car Seat

If done correctly, this should smoothly click into place onto its sturdy base which rests at about a 45-degree angle backwards towards behind whilst keeping baby upright. The following video show from rearward-facing installation techniques through lifting technique when removing infant carrier from stroller:

In conclusion, getting started may seem scary at first glance – but worry not! Anyone can do this if he/she strictly follows instructions carefully. .

Choose a rear-facing seat position in the back seat

When it comes to installing your Graco Junior Baby Car Seat, one of the most important considerations is where you will place the car seat within your vehicle. According to safety guidelines, infants should always be placed in a rear-facing car seat secured in the backseat of the car as this is considered safer than putting them in front.

It is recommended that you choose the middle of the back seat for your baby’s car seat if possible. This provides maximum protection from side-impact crashes and ensures your child is positioned as safely as possible while on the road.

If placing the infant car seat in any other location apart from the center, ensure that you have read your manufacturer’s manual carefully so that you can correctly install and adjust your car seat at all times – since different vehicles may present unique challenges when it comes to installing an infant car set especially placement differences caused between passenger cars or trucks

To further reduce injuries during accidents, make sure to follow up on regular maintenance services supplied by Graco along with keeping track of new recalls related specifically to child seats provided through their site before purchasing another automobile model using this installation method.

In addition to simply placing tbbhe car seat securely in its proper location, you need also pay close attention to how secure it stands once installed. Shake and rock it vigorously ensuring there is no movement signs; vibrations should not cause leans – however slight they might seem. . If everything appears intact yet after travelling for some time some motion occurs stop and verify clamp settings, looking for damages repair immediately without delay. Paying careful attention now could save somebody down-the-road or hurt future possibility. Always prioritize safety first – ergo purchase top-of-line brands like JuniorBaby CS which guarantees added support against common faults such malfunctioning belt straps or inadequate auto-clamp fastenings that lead to terrible accidents

Ensure the car seat is level on the car’s seat

When installing a Graco Junior Baby Car Seat, it is important to make sure that you achieve a level installation. This will ensure that your baby remains safe and comfortable during your travels.

To begin with, place the base of the car seat onto the back seat of your vehicle. Use one hand to apply firm pressure while pressing down on the base in order to get rid of any slack between the car’s upholstery and the infant carrier.

The next step is to check if the leveling indicator at the front of your junior baby car seat shows that your unit is even enough for use. It should not tilt or lean too much in either direction when measured using this device. If there are issues with an uneven surface, consider using rolled up towels until everything levels out nicely before tightening straps across both rear-facing positions situated just above where kids rest their head whilst traveling; always ensuring these remain snug around children’s bodies without room excess left over as they’ll inevitably wriggle about once belt tightened.

If you find you’re having trouble achieving a leveled position, try adjusting how tightly those belts run against them – increasing tension occasionally whilst stopping when no longer feasible via manufacturer recommendations so strain does not cause early tearing into product wear overtime or undermine its safety properties entirely which could endanger occupants’ lives!

Once you have ensured proper balance by making adjustments as required per manual guidelines provided by suppliers like Graco themselves (after reading these instructions several times), carefully buckling in your child without twisting clips but maintaining tight positioning throughout travel duration towards future rides free from mishaps coming ahead.

Secure the Car Seat

If you just bought a Graco Junior Baby Car Seat, you need to know how to install it correctly. Safety is very important when transporting babies and infants. Installing car seats properly can protect them in case of an accident.

The Graco Junior Baby Car seat comes with a base that is easily installed in your car using either the vehicle’s seat belt or LATCH (Lower Anchors and Tethers for Children) system. Make sure to read both the car manual and the baby car seat manual for detailed instructions on installation before getting started.

To install the Graco Junior Baby Car Seat:

  1. Choose a location: The back seat of the car is generally safer than the front because airbags could injure infants if deployed during an accident.
  2. Position the base: Centering the infant carrier over your chosen seating position will provide maximum protection.
  3. Buckle up or use LATCH: Threaded-tether anchor points inside/behind rear seats allow easy, secure attachment of baby safety-seats without any additional hardware/adapters.
  4. Tighten straps: Once positioned securely, tighten all straps so that there is minimal movement that does not exceed one inch from side-to-side or front-to-back; more significant motion puts children at risk in crashes.
“According to NHTSA guidelines, always have your child ride in a rear-facing restraint until they reach 3-4 years old AND 40 pounds. “

Always double-check by pulling down on both sides of the infant carrier rail after buckling up to ensure proper contact with anchors/hooks.

You now understand how to keep your little ones safe while traveling! Always check regularly whether everything is installed and utilized safely to minimize any possible safety risks while traveling with your infants!

Use the LATCH system or seat belt to secure the car seat

If you’ve recently bought a Graco Junior Baby Car Seat and wondering how to install it, fret not! It’s quite an easy process that hardly takes any time at all. Follow these simple steps:

1. Start by finding the ideal position for placing the car seat in your car.

2. Attach the base of the car seat using either the latch system or using a seatbelt, depending on which one your vehicle supports.

3. Make sure that there is no slack in the belt while securing it around the car seat.

4. Once secured properly, check if the entire installation passes through various safety parameters, such as angle indicators and lockdown devices.

“Always make sure that your baby’s car seat installation meets current government regulations and standards. “

The Graco Junior Baby Car Seat should never be installed in the front passenger side with airbags because of security reasons. Instead, place it in the middle backseat area – this is where most experts recommend putting rear-facing seats since they provide additional protection from side crashes.

To sum up, use either a latch system or seat belt to fasten your Graco Junior Baby Car Seat into your vehicle correctly, ensuring that it always adheres to the necessary safety standards established by law authorities.

Ensure the car seat is tightly secured and does not move more than an inch

If you have a Graco Junior Baby Car Seat, knowing how to properly install it in your vehicle can make all the difference when it comes to keeping your little one safe. While installation instructions may vary depending on the specific model of your car seat, there are some general tips to keep in mind to ensure that your baby’s car seat stays safely secured while you’re on the road.

The first step is making sure that the car seat is facing the right direction. For infants up to 22 pounds (10 kg), use a rear-facing infant car seat. Make sure it is placed at a 45-degree angle so that your baby’s head doesn’t flop forward.

Next, position the base of the car seat in the backseat of your vehicle or wherever deemed appropriate by the instructions provided with your particular car seat model – ensuring that it fits securely into place, as specified by manufacturer guidelines.

You should always refer directly to Graco for official guidance because mandates can change over time if tested devices show new safety recommendations based on accident simulations or damage thresholds were improperly set-up during testing trials—not following safety rules could result in severe injuries or fatalities.

Once positioned correctly, check that level indicators show proper alignment before attaching clips around either side of where occupants’ thighs located; then lock down until snugly tight under tension without slipping from its routine fittings within movable attachment location options such as hooks/tethers designated specifically per laws regulating various orientations multifold systems folding out flat instead which will cause harm rather than protect babies they’re supposed safeguarding, also situated according certain models compatibility within stated application limitations unless otherwise advised due another different reason guiding intended operations tailored toward least-risk possibility causing injury among passengers while driving vehicles equipped adding features their like child restraint devices and supplemental restraint systems.

Ultimately, ensuring that your Graco Junior Baby Car Seat is tightly secured and does not move more than an inch while you’re driving can give you peace of mind knowing that your baby is safe on the road. Following manufacturer’s guidelines closely will ensure a proper installation process.

Adjust the Straps

If you have just bought a Graco Junior Baby Car Seat, installing it correctly is essential to ensure that your baby is safe and secure. Understanding how to adjust the straps is an important step in this process.

The first thing you need to do is adjust the harness height so that it fits your child snugly. To do this, locate the slots on either side of the car seat where the shoulder straps come through. Make sure they are at or slightly below your child’s shoulders for rear-facing mode.

You can also adjust the tightness of the straps by pulling on them near their anchor points until they feel comfortably snug against your child’s body. Be careful not to tighten them too much as this could cause discomfort and make it difficult for your baby to breathe properly.

A well-fitted harness should be snug with no slack between it and your baby’s body.

You may also want to consider adjusting the recline angle of the car seat depending on whether you are using it in rear- or forward-facing modes. This will help keep your baby comfortable and minimize any potential injuries during sudden stops or collisions.

The last step in adjusting the straps is securing them correctly over your child’s lap. Check that there aren’t any twists in the belts and fasten them securely into place with sufficient tension – but not too tight – ensuring that they cannot slip down off of hips if engaged incorrectly.

In conclusion, correct strap adjustment plays a prominent role when forming a harmonious relationship between comfortability and safety. Herein we have looked at making sure our armor-clad little ones receive optimum security while remaining contented during what might turn out otherwise: A stressful long journey.

Adjust the shoulder and waist straps for a snug fit

If you have recently purchased a Graco Junior Baby Car Seat, you will need to know how to install it properly. The first step is to adjust the shoulder and waist straps for a snug fit so that your baby remains secure during transportation.

To adjust the shoulder straps, start by placing your child in the car seat while facing forward. Next, place one strap over each of your child’s shoulders and clip them together at their chest. Ensure that both shoulder straps are level with one another before proceeding.

To adjust the waist strap, make sure your child’s pelvis is as far back in the car seat as possible. Buckle up the crotch buckle gently but securely between your child’s legs. You can then begin adjusting the position of the waist belt according to your child’s size until it fits snugly across their hips.

Note: Make sure not to leave any slack on either set of belts! Loose-fitting straps may compromise safety measures while using this seat.

After correctly positioning all straps at an appropriate tightness point, conduct one last check-up by giving gentle tug tests through checking if you could just pinch some backup fabric around any harnesses (that kind means they are too loose). Tighten anything seemingly slack until there is no excess length left unsecured under or above vital organs such as necks or chests (this would obstruct breathing patterns/suspend keying-system which activates airbags built-in cars behind favorite seats).

In conclusion, proper installation of Graco Junior Baby Car Seats should be taken seriously for optimal children riding experiences and ultimately security from harm caused due to transport accidents or unexpected stoppage periodical checks advised.

Ensure the chest clip is at armpit level

To install a Graco Junior Baby car seat, you first need to read through the manufacturer’s instructions for your specific model. This will give you guidance on how to handle any unique features or locking mechanisms included in your particular car seat.

The next step is to choose an appropriate location in your vehicle for the car seat. Generally, this means choosing a rear seat position that offers plenty of space and visibility – away from airbags that may be present in some front passenger side areas.

You should then carefully adjust the straps, according to your child’s size and age. Starting with the shoulder straps pulled all the way out so that they are easy to work with, thread them through the slots provided in the back of the car seat.

Remember – it’s important that you never use both a lower connector AND a slotted booster seat belt at once when installing a car seat. Choose one or another depending on which method attaches best and most securely in your car each time!

Finally, make sure that the chest clip is held directly over your child’s upper sternum by sliding it easily up or down along its webbing until positioned correctly between their nipples but not below their shoulders- always ensuring this positioning for added safety during transit!

If you have any questions about installing your Graco Junior Baby Car Seat or finding help if needed please consult with experts before attempting anything yourself without proper knowledge guidelines! Remember, following manufacturer directions is key when safely securing little ones while traveling on roadways across America today!

Check for Proper Installation

Installing a car seat may seem daunting, but with proper instructions and guidance, you can easily install your Graco Junior Baby Car Seat. Here are some steps to take before hitting the road:

First, review the manufacturer’s instructions carefully. Follow them as each child safety seat has unique installation requirements that ensure optimal protection for children.

Make sure that the infant car seat is installed in the vehicle correctly. The base needs not to be loose or slide around when driving on bumpy roads.

Note: Installing an infant-only car seat should always be done in the backseat of the vehicle facing towards the back using a harness. It is vital that parents follow all recommendations related to their specific model of carrier/car seat combination product while setting up and attaching it correctly into vehicles.

Once installation becomes complete, check whether there is any movement from side-to-side or front-to-back regarding your toddler’s restraint system – if so loosen its tension by pulling down on relevant straps until appropriate slackness is attained such that you can bring other clips’ ends together without obstructing access points for latch/connectors involved at both sides (right/left).

Lastly, test out how tight it feels as well; testing it involves placing two fingers between infants chest clip and tightening strap checking whether nothing gets rolled over! Do this often and adjust accordingly!

Check for a secure and tight fit

When it comes to installing the Graco Junior Baby Car Seat, one of the crucial steps is ensuring that it fits securely and tightly. Doing so will keep your little one safe throughout their journey in the car.

Before placing your baby into the seat, double-check if you have installed the base correctly. Ensure that it sits flat on the car’s seat, with no more than an inch of movement from side-to-side or front-to-back. The level indicator should be parallel to the ground as well.

The next step is to ensure that the harness straps are adjusted appropriately. Adjust them accordingly based on your child’s height and weight, making sure they’re snug but not too tight. You’ll know they’re just right when you can’t pinch any slack between your fingers at your baby’s shoulders.

Please note: As tempting as it may be, never place padding under or behind your child or use aftermarket products such as headrests or seat liners. These items could affect how secure and protected your child is during a crash.

In summary, always check if everything is fitting snugly and securely; otherwise, refer back to instructions manual for troubleshooting tips till you get appropriate adjustment measures because correct installation goes a long way in guaranteeing both comfort and safety for your child.

Ensure the car seat does not move more than an inch

The Graco Junior Baby Car Seat is a rear-facing infant car seat designed to keep your baby safe while travelling by car. Installing this car seat can be intimidating, but if done correctly it will provide maximum protection for your child.

To start installing the car seat, ensure that you have read and understood all the instructions provided in the user manual. The next step is to make sure that the base of the car seat fits snugly onto the vehicle’s backseat.

Once you’ve attached the base securely to your vehicle’s backseat using either LATCH connectors or a safety belt, check to see whether there’s any movement between the base and vehicle. To test this, firmly hold onto both ends of the base whilst pulling forward on each side of it. There should be little to no movement at all!

“Proper installation of your Graco Junior Baby Car Seat can mean the difference between life and death for your precious little one. “

If there is any movement beyond 1-inch when making adjustments during testing, repeat steps accordingly until there are zero movements upon tightening.

Last but not least, ensure that you have properly buckled up your baby into their seats with straps criss-crossing over their chest which ensures they remain upright throughout. ”

Follow these simple tips carefully as proper installation of your Graco Junior Baby Car Seat can mean the difference between life and death for your precious little one.

Frequently Asked Questions

What are the steps for installing Graco Junior Baby Car Seat?

To install the Graco Junior Baby Car Seat, first, remove the base from the box and adjust the recline angle. Then, slide the base into the car seat and secure it with the seat belt or LATCH system. Next, attach the car seat to the base and adjust the harness straps. Finally, test the car seat to make sure it is properly installed and secure.

What tools do I need to install Graco Junior Baby Car Seat?

You don’t need any special tools to install the Graco Junior Baby Car Seat. All you need is the car seat, the base, and the instruction manual. The car seat and base come with all necessary parts and accessories, including the LATCH system and seat belt. However, it’s a good idea to have a towel or blanket handy to help with adjusting the recline angle and securing the car seat.

Is it safe to install Graco Junior Baby Car Seat on my own?

Yes, it is safe to install the Graco Junior Baby Car Seat on your own, as long as you carefully follow the instructions provided in the manual. The car seat and base are designed to be easy to install and use, and they come with clear and detailed instructions. However, if you have any concerns or questions about the installation process, you can always seek help from a certified car seat technician or a local car seat inspection station.

Can I use Graco Junior Baby Car Seat in any type of car?

The Graco Junior Baby Car Seat is designed to be compatible with most cars, SUVs, and vans. However, before using the car seat, you should check your vehicle’s owner manual to make sure it has the proper LATCH or seat belt systems and to confirm the recommended location for installing the car seat. Additionally, you should always make sure the car seat is securely and tightly installed, regardless of the type of vehicle you have.

What are the common mistakes to avoid while installing Graco Junior Baby Car Seat?

When installing the Graco Junior Baby Car Seat, some common mistakes to avoid include not adjusting the recline angle correctly, not routing the harness straps properly, not securing the car seat tightly enough, and not double-checking the installation before using the car seat. To ensure the safety of your child, it’s important to carefully follow the instructions and avoid rushing through the installation process.

How long does it take to install Graco Junior Baby Car Seat?

The time it takes to install the Graco Junior Baby Car Seat can vary depending on your experience and familiarity with the car seat and the installation process. Generally, it takes about 15-30 minutes to properly install the car seat and base. However, it’s important to take your time and carefully follow the instructions to ensure that the car seat is installed safely and securely.

Do NOT follow this link or you will be banned from the site!