“You Won’t Believe How Easy It Is To Install Rear Seats On A Club Car Precedent”

If you own a Club Car Precedent, you might be contemplating the installation of rear seats. Adding rear seats to your golf cart is an excellent way to accommodate more passengers comfortably. However, it can seem like a daunting project for those who aren’t familiar with how these vehicles work.

The truth is that you won’t believe how easy it is to install rear seats on a Club Car Precedent! Whether you’re looking to increase passenger capacity or simply want to add some extra seating options, installing rear seats will enhance your experience while cruising around the neighborhood or driving on the golf course.

“I couldn’t believe how simple it was to install rear seats on my club car precedent! With the help of a couple of friends and following instructions from reputable blogs, we had installed comfortable back-seats in just one afternoon!” – John, happy customer

Are you wondering why this seemingly complicated task turned out so easy? We’re here to break down all the reasons why adding rear seats to your Club Car Precedent is not only doable but also straightforward. Keep reading!

Step 1: Gather Materials

The first step in installing rear seats on your Club Car Precedent is to gather all the necessary materials. Here’s a list of what you’ll need:

• Rear seat kit
• Battery charger
• Socket wrench set
• Torque wrench
• Screwdriver set

You can purchase a rear seat kit from any authorized dealer or an online vendor for around $350-$500.

If you plan to install the seats yourself, make sure that you have enough time and energy for the task. It usually takes about four hours to complete it thoroughly without mistakes.

Note: Before beginning installation, check with your local authorities for laws regulating golf carts equipped with rear-facing seats. There may be regulations regarding safety belts, age restrictions, etc. , depending on where you live.

Once you have gathered all supplies and researched any relevant regulations, proceed to Step 2 to begin installation.

Tools Needed:

If you are looking to install rear seats in your Club Car Precedent, there are a few tools that you will need to ensure a safe and efficient process. Some of these tools may already be in your garage or workshop, while others might require purchase or rental.

The first tool you will require is a socket set, as this will allow you to remove the old brackets and seats from your golf cart. You should also have wrenches specifically designed for use with bolts and nuts, such as an adjustable wrench and standard box-end wrenches. If possible, look for wrenches with both Metric and SAE sizes, so that you can work with ease no matter what measurements you come across.

A drill bit set compatible with metal drilling will be needed if new holes need to be made. A saw capable of cutting steel tubing (if applicable), pry bars (or large flat-head screwdrivers), pliers like needle-nose/standard joint pliers should help during the installation process.

Note: Always remember safety measures before starting any task because some steps involve drilling them through by force, which can harm ties’ shape badly; please wear adequate gear for protection against flying debris!

Necessary hardware pieces include brackets/bolts/fasteners based on your seat’s manufacture instructions – which is specific, varies between brand companies – so make sure they’re chosen accordingly.

Lastly, working space where the vehicle won’t get scratched/damaged matters too. Some optional items could include painters tape/plastic wrapping sheets/cloth etc. , but it isn’t mandatory unless deemed necessary once seeing the job ahead (& considering one’s surroundings).

Parts Needed:

If you want to install rear seats on your Club Car Precedent, there are a few parts that you will need. Here is a list of the necessary components:

• Rear seat kit with brackets and hardware
• Battery conversion kit (if not already installed)
• Seat belts or harnesses
• Safety grab bars (optional but recommended)

The first thing you need is a complete rear seat kit with all the necessary brackets and hardware for installation. These kits come in various sizes and styles to match the look of your cart.

You may also need a battery conversion kit if your cart does not have one already installed. This kit allows you to move the batteries from under the seat to another location, creating space for the new rear seats.

In addition, safety is always important while driving, so be sure to purchase seat belts or harnesses for each passenger as well as safety grab bars for added stability.

It’s essential that you follow the manufacturer’s instructions carefully when installing any new parts on your golf cart. Failure to do so can result in injury or damage to your vehicle.

Once you have obtained all of these parts, it’s time to start the installation process. Make sure that you have all tools required before starting and ensure proper alignment by measuring distance between existing holes on frame where brackets should be mounted aligning them at equal distances from center point setting proper allowances width wise. Carefully place bolts through bottom support bracket attaching it firmly inside frame rails then create top mounting hole adjusting accordingly before tightening securely above batteries onto designated plates attaching C-Clip Washer combination followed uplastly securing top bolt drivers side after settling present adjustment pre-bolt so that all part of unit will fit snugly together while in motion.

Step 2: Remove Existing Components

Before you can install new rear seats on a Club Car Precedent, you need to remove the existing components. To do this, follow these steps:

1. Disconnect the Battery

The first step is to disconnect the battery and isolate it from any electric power source.

2. Remove the Seat Cushion and Backrest

You will need to remove the seat cushion and backrest of your golf cart so that you can access the brackets underneath them. Check for bolts or screws holding your seat in place before gently removing it from its spot.

3. Take Off Excess Parts Such as Arm Rests or Cup Holders

If there are armrests or cup holders attached to your seats, remove them carefully as they may be reused later when installing the new fixtures.

“Make sure to keep all parts and hardware safe during removal – Lost pieces may inconvenience installation. ”

4. Unbolt Existing Brackets from The Frame

To release old brackets off the frame securely and accurately, use an appropriate wrench size for each bolt head size at one time until all nuts come undone altogether without causing damage that could ruin vehicle factory specs. Be careful while removing any remains of bolts covering unwanted spaces where dirt accumulates, leading potentially sagging body area due to loosening vibrations overuse duration.

Now that you have successfully removed older seats, let’s move forward with our next installment step by inserting brand-new equipment according to manufacturer guidelines!

Removing the Bag Rack:

If you want to install rear seats on your Club Car Precedent, it is necessary to remove the existing bag rack. To start with removing the bag rack:

Step 1: Turn off the power switch present beneath the seat.

Step 2: To expose the bolts present below each side of the bag rack and secure it to the cart frame base, pull up from both sides of the synthetic bags covering it.

Step 3: One person should hold a socket wrench while another person loosens or tightens two nuts found at either end of each bolt in place using wrenches.

“It’s important to pay close attention to where and how parts are taken out so that they can be reassembled without confusion. “

The above steps will help you safely take off your Club Car Precedent’s existing bag racks before proceeding for installing new rear seats. Now that you have removed them, you can proceed for next steps involved in installing rear seats.

Remember – this task might sound easy but could require some tools specific to a golf cart, especially if something is rusted or seized together due to weather conditions. Any mistake during installation may damage your cart; therefore, hiring an expert mechanic service provider would always be best as these types of professionals possess all necessary knowledge about replacing your club car precedent seats safely.

Removing the Fender Flares:

If you want to install rear seats on your Club Car Precedent, you will need to remove the fender flares first. Here’s how to do it:

“Make sure the car is parked on a level surface and the parking brake is engaged before starting. “

1. Remove any bolts or screws that secure the fender flare to the body of the car using a socket wrench or screwdriver.

2. Gently pry off the fender flare from the edge of the body. Use caution not to damage any paint or scratch anything.

3. Clean up any remaining adhesive residue by applying some rubbing alcohol onto a rag and wiping down until clean.

4. Repeat these steps for all four fenders before proceeding with any further installation processes.

Congratulations! You have successfully removed your Club Car Precedent’s fender flares in preparation for installing rear seats. ”

Step 3: Install Seat Base

Now that you have removed the old rear seats from your Club Car Precedent, it’s time to install the new seat base. Follow these steps:

1. Position the Seat Base

The first step is to position the seat base in place of where the old one was removed. Make sure it aligns properly with the holes on the cart frame.

2. Attach Rear Straps

Next, attach the rear straps for secure installation. These straps should come with your new seat kit and they will hold the seat base firmly onto the cart frame.

3. Connect Seat Backrest or Arm Rests

If your new set comes with either a backrest or arm rests, connect them now according to their instructions.

“Make sure all bolts are tightened securely for safe use. “

Your new seats are now installed and ready for use! Enjoy a comfortable ride around your Club Car Precedent!

Attaching the Seat Base:

If you are looking for a guide on how to install rear seats on your Club Car Precedent, you have come to the right place. Installing rear seats can be challenging, but if done correctly, adds comfort and convenience to your vehicle.

The first step in installing rear seats is attaching the seat base. This process involves securing the base onto the frame of your golf cart securely. Here are some steps that will help you with this task:

Tip: Always make sure you read the instructions carefully before trying to attach any parts as incorrect installation could result in malfunctions or safety issues.

Step 1: First, assemble all required equipment – nuts and bolts needed for fixing the seat base along with any necessary tools like wrenches or screwdrivers

Step 2: Next up, remove any inventory components from where you want to add a new bench-style bottom vinyl seat setup

Step 3: Once cleared out, find & align both threaded holes at front side/edge portion’s overlapping section located atop top foot rest bar/floorboard’s back end

Step 4: Take your mounting plates and put overhole location points against overlapped sections located atop Footrest bracing bars after sliding footrest forward a few centimetres

To ensure passenger and driver-powered safety when using your club car precedent. It is important that each component is installed adequately following manufacturer guidelines. By following these simple steps, you can safely install rear seats on a Club Car Precedent without any hassle.

Securing the Seat Base:

The next step in installing rear seats on a Club Car Precedent is securing the seat base to the cart. This involves attaching brackets and bolts to ensure that the new seating is safe and secure.

First, you will need to place the seat base onto the cart’s deck and align it properly. Once aligned, mark where each hole should be drilled for the brackets using a pencil or marker. Then, drill holes into each marked spot on both sides of the cart.

To attach the brackets, insert bolts through them and slide them through the drilled holes from underneath. Secure everything with nuts inside the frame or undercarriage, ensuring all bolts are tight enough to hold the weight of passengers without wobbling or coming loose during transit.

“It’s important to take safety measures seriously when modifying any vehicle. “

You’ll also want to double-check that your new seating arrangement does not interfere with any existing elements such as light fixtures or other accessories on your cart. If needed adjust these items accordingly before completing this final step by affixing headrests into their slots on top of backrest cushions.

Overall, installing rear seats on a Club Car Precedent can be done easily – just follow proper installation instructions carefully! Always make sure that every component has been checked for stability before taking passengers out for a spin!

Step 4: Install Seat Backs

The final step in installing rear seats on your Club Car Precedent is to attach the seat backs. This part of the process requires careful attention to detail, as you will need to ensure that each backrest is installed securely and properly aligned.

To begin, line up the first seat back with its corresponding brackets. The brackets should be located on the rear roof supports and bolted into place. Once you have lined up the backrest with the brackets, insert a hex head bolt through one of the pre-drilled holes in each bracket and tighten it down snugly using a socket wrench or other appropriate tool.

Next, repeat this process for the second seat back, again lining it up carefully with its own set of brackets before inserting bolts and tightening them down securely.

Note that during installation, it’s important to keep an eye out for any signs of misalignment or looseness – these can indicate that your seatbacks are not attached correctly and may need further adjustments.

In conclusion, installing rear seats on your Club Car Precedent can seem like a daunting task at first glance but by following these simple steps you should be able to accomplish it without too much trouble. By taking care to do everything properly and safely along every step of the way, however long it may take you’ll be ensured comfort while driving your golf cart around smoothly!

Attaching the Seat Backs:

The next step to install rear seats on a Club Car Precedent is attaching the seat backs. This process can be done quite easily if you follow this simple guide.

Begin by locating the brackets at both sides of your Club Car Precedent’s body, which are usually found right behind the driver and passenger seats. Then, take the backrest frames of your new rear seat kit and slide them into these brackets. Make sure that they fit in snugly before moving onto the next step.

Once the backrest frames are aligned with the bracket holes securely, use bolts and washers to fix these into place. Ensure that all bolts are tightened properly so that it does not wobble even when driving on rough terrain. After tightening up everything thoroughly, give a gentle tug on each side of the frame to check for any looseness or instability to ensure safe riding.

Note: make sure you have read and understood every installation instruction manual carefully before proceeding with installing rear seats on a Club Car Precedent

In conclusion – after completing this part of the installation process, attach some cushions or seat covers over the metalframes. You now have installed comfortable and safe seating for additional passengers in your golf cart.

Securing the Seat Backs:

Installing rear seats on a Club Car Precedent is an excellent way to increase passenger capacity. However, it’s essential to ensure that the seat backs are secured correctly before using them. Here are some instructions on how to secure the seat backs:

Step 1: Remove any covers or accessories from your Club Car Precedent and park it in a level place.

Step 2: Locate the brackets on the car’s body where you’ll be mounting the rear seat back. Ensure they’re clean and no rusted components exist where the screws will penetrate.

Step 3: Take the hardware included with your kit (generally screws, bolts, and nuts), then hand tighten one at each of your rear floor rail-ends by means of either four #14 self-tapping torx head screws or through-bolting, depending upon which type fits your current cart model better.

Note: Do not over-tighten these particular fasteners since too much torque may eventually cause deformation/damage on sub-frame tubes beneath golf course conditions after several months continuous useages.

Step 4: With two people holding onto opposite sides’ upper horizontal pieces simultaneously (or alternatively ask someone who stays nearby if they would kindly assist), manually slip their lower edge into both side mount flanges located beside those square brackets on vehicle structure described earlier that we have already prepared now properly again involving similar precautious steps throughout this procedure here mentioned above as necessary for matching all installation requirements perfectly suitable according our propriety guidelines designed optimizing long-lasting performance under challenging circumstances typical within daily usage environments experienced by average users around different kinds of terrain encountered while driving carts.

In conclusion, securing the seat backs is an essential part of installing rear seats on a Club Car Precedent. By following these instructions and using appropriate hardware, you can ensure that your rear seats are securely mounted for safe usage in various conditions.

Step 5: Reattach Fender Flares and Bag Rack

To complete the installation of rear seats on your Club Car Precedent, it is essential to reattach the fender flares and bag rack back into their respective positions. Here are the steps involved:

1.Place the driver side fender flare over its area on the car’s body and insert the screws through its holes.

2.Tighten these screws using a socket wrench or drill with screwdriver attachment until they’re securely fastened in place.

3.Repeat this process for both passenger side (right) fender flare as well as bag racks if you have removed them previously.

Note that when attaching the bag rack, center it between both sides ensuring even spacing from either end towards each wheel hub. This will provide better balance during transportation and prevent any damages caused by unbalanced load distribution.

Your club car precedent is now ready to accommodate passengers at ease! Congratulations!

Reattaching the Fender Flares:

If you are looking to reattach your fender flares on a Club Car Precedent, then this guide is for you. The process of reconnecting or installing certain parts may seem complicated at first but it eventually becomes easy after some practice and understanding. In the following sections, we will take you through all the necessary steps needed to successfully reattach your fender flares.

The first step in this process is to ensure that you have all the tools required such as bolts, washers and nuts. Once you have these items ready, check if there are any cracks on the surface of the fender flare mount holes before proceeding with attachment installation.

Next, align the top edge of your newly purchased fender flare (or existing one) with your golf cart’s wheel arch using an alignment tool or by simply eye-balling it. Use clips where possible and pre-drill holes without fitting screws initially so that adjustments can be made later without damaging anything.

Note: It’s important not to overtighten these screws as they can cause damage when too much pressure is applied; just use enough force for them to fit securely into place!

Once aligned properly, put in all mounting hardware, and continue working around perimeter fastening everything down carefully till finished attaching each section of each wheel well covering piece independently starting from rear side first going towards front end closest up against tires being sure only snug tightness until final seating adjustment locking

.

Congratulations! Now that you’ve learned how to install/reconnect fender flares onto a Club Car Precedent Golf Cart safely and effectively- Enjoy Your Ride!! If you find yourself facing issues along the way or would like further help when putting new seats back in– don’t hesitate asking professional assistance – getting advice from a mechanic is always wise.

Reattaching the Bag Rack:

If you own a Club Car Precedent and need to install rear seats, it’s essential to know how to reattach the bag rack. The first step is locating the holes on the frame where the bolts connect with nuts underneath – these will be visible towards either end of your cart.

The next thing you’ll want to do is place one bolt through each hole in order before sliding them back into position so they are flush against both sides again. At this point, there should be four bolts sticking out from either side of your vehicle and once all eight screws have been inserted securely into their corresponding slots, tighten up any remaining loose ends using wrenches or pliers as necessary!

If you’re having trouble getting everything aligned properly don’t worry – just loosen things up slightly until everything seems even again before tightening down firmly upon completion for optimal stability.

It may also be helpful when reinstalling rear seats that center fasteners are installed precisely too – otherwise, misalignment can lead to unnecessary shaking while driving at higher speeds.

This process isn’t terribly complicated but does require some patience and attention-to-detail. With careful execution though, anyone can accomplish this task successfully without needing professional assistance which saves time and money in addition ensuring dependable results every time!

Frequently Asked Questions